centrifugal pump shaft broken|pump shaft keeps breaking

Vacuum degassers use a combination of turbulent flow and reduced internal tank pressure to move gas-cut drilling fluid and release gas bubbles. Several designs are available; the most common types are the horizontal tank/jet pump design, the vertical tank/jet pump design, and the vertical tank/self-priming pump design. .

Centrifugal pumps are essential equipment in various industries for transferring fluids. However, one common issue that operators often face is the breakage of pump shafts. A broken pump shaft can lead to costly downtime and maintenance, impacting overall productivity. Understanding the root causes of pump shaft breakage is crucial for preventing such incidents. Here are ten common causes of broken shafts in centrifugal pumps and solutions to mitigate these issues.

Fatigue failure (also known as failure due to reversed bending fatigue with rotation) is the most common cause of pump shaft fractures/failures. The shaft’s purpose is to transmit the rotational motion and power (torque)

1. Misalignment

Misalignment is one of the most frequent causes of pump shaft breakage. When the pump shaft is not properly aligned with the motor shaft, it creates excessive stress on the shaft, leading to fatigue and eventual failure. Regular alignment checks and adjustments can help prevent this issue. Using laser alignment tools can ensure precise alignment, reducing the risk of shaft breakage.

2. Excessive Shaft Load

Excessive shaft load can result from various factors, such as overloading the pump, operating beyond the design limits, or running the pump at higher speeds than recommended. This puts undue stress on the shaft, causing it to break. Ensuring that the pump operates within its specified load limits and speed range can prevent shaft breakage due to excessive loads.

3. Corrosion and Erosion

Corrosion and erosion of the pump shaft can weaken its structural integrity, making it more susceptible to breakage. Exposure to corrosive fluids or abrasive particles can accelerate shaft deterioration. Regular inspection and maintenance, including protective coatings or material upgrades, can help prevent corrosion and erosion-related shaft failures.

4. Fatigue Failure

Fatigue failure occurs when the pump shaft is subjected to repeated stress cycles, eventually leading to crack initiation and propagation. Factors such as vibration, cavitation, and fluctuating loads can contribute to fatigue failure. Implementing preventive maintenance practices, such as vibration monitoring and load analysis, can help identify potential fatigue issues before they cause shaft breakage.

5. Improper Shaft Material

Using the wrong material for the pump shaft can result in premature failure. The shaft material should be selected based on the specific operating conditions, including fluid compatibility, temperature, and pressure. Consult with a materials engineer to ensure that the shaft material is suitable for the application to prevent unexpected breakage.

6. Shaft Deflection

Shaft deflection occurs when the shaft bends under load, causing stress concentrations that can lead to breakage. Factors such as improper bearing alignment, inadequate support, or excessive radial forces can contribute to shaft deflection. Proper design considerations, such as selecting appropriate bearing types and sizes, can help minimize shaft deflection and prevent breakage.

7. Shaft Seizure

Shaft seizure can occur due to lack of lubrication, contamination, or improper assembly. When the shaft becomes stuck or binds within the pump housing, it can experience excessive stress and ultimately break. Regular lubrication maintenance and ensuring proper assembly practices can prevent shaft seizure and subsequent breakage.

8. Water Hammer

Water hammer, or sudden pressure surges within the pump system, can exert significant forces on the pump shaft, leading to breakage. Installing surge protection devices, such as pressure relief valves or dampeners, can help mitigate water hammer effects and protect the pump shaft from damage.

9. Thermal Expansion Mismatch

Differential thermal expansion between the pump shaft and surrounding components can induce stress concentrations, potentially causing shaft breakage. Proper thermal management, including thermal insulation or expansion joints, can help minimize thermal expansion mismatch and reduce the risk of shaft failure.

10. Operational Overload

Here are ten common causes of broken shafts in pumps: 1. Misalignment. One of the most frequent causes of shaft breakage is misalignment. When the pump shaft is not properly aligned with the motor shaft, it creates excessive stress …

Conical cyclone desander is a type of solid control equipment that uses a set of hydrocyclones to separate sand and silt from the drilling fluids in drilling rigs. It is installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. . Global and United States Conical Cyclone Desander Market Report .

centrifugal pump shaft broken|pump shaft keeps breaking