define cavitation in centrifugal pump|pump impeller cavitation damage pictures

The most efficient method of industrial oil degassing is vacuum processing, which removes air and water solved in the oil. [6] This can be achieved by: spraying of oil in large vacuum chambers; .

When vapor bubbles are created inside the pump and subsequent collapsing of these bubbles inside the pump is known as cavitation. Collapsing of bubbles creates tremendous pressure waves that can cause damage to the pump components. Cavitation is a common issue in centrifugal pumps and can lead to various problems if not addressed properly.

Pump cavitation is a potentially damaging problem in pumps that are not properly configured or being used for their intended application. Here, we’ll explore what causes

Centrifugal Pump Cavitation Problems

Cavitation in centrifugal pumps can lead to several problems, including:

1. **Decreased Pump Performance:** Cavitation can reduce the efficiency of the pump, leading to decreased flow rates and lower pressure output.

2. **Vibration and Noise:** The collapsing bubbles can cause vibration and noise in the pump, which can be detrimental to the pump's operation.

3. **Damage to Pump Components:** The high-pressure waves created by cavitation can cause damage to the pump impeller, casing, and other components, leading to increased maintenance costs.

How to Prevent Centrifugal Pump Cavitation

Preventing cavitation in centrifugal pumps is essential to ensure the smooth operation of the pump. Some ways to prevent cavitation include:

1. **Proper Pump Sizing:** Ensuring that the pump is properly sized for the application can help prevent cavitation. Oversized pumps are more prone to cavitation.

2. **Maintaining Proper NPSH:** Net Positive Suction Head (NPSH) is crucial in preventing cavitation. Ensuring that the NPSH available is greater than the NPSH required can help prevent cavitation.

3. **Regular Maintenance:** Regular maintenance of the pump, including checking for worn impellers and adjusting pump speed, can help prevent cavitation.

4. **Installing a VFD:** Installing a Variable Frequency Drive (VFD) can help control the pump speed, reducing the risk of cavitation at low flow rates.

Why is Cavitation Bad

Cavitation is bad for centrifugal pumps for several reasons:

1. **Damage to Pump Components:** The collapsing bubbles can cause erosion and pitting on the pump impeller and other components, leading to reduced pump efficiency and increased maintenance costs.

2. **Reduced Pump Performance:** Cavitation can reduce the pump's performance, leading to lower flow rates and pressure output.

3. **Increased Noise and Vibration:** Cavitation can cause noise and vibration in the pump, which can be disruptive and indicate potential damage to the pump.

Pump Impeller Cavitation Damage Pictures


The image above shows the damage caused by cavitation on a pump impeller. The pitting and erosion on the impeller blades are a result of the collapsing bubbles during cavitation.

Causes of Pump Cavitation Centrifugal

Some common causes of pump cavitation in centrifugal pumps include:

1. **High Pump Speed:** Operating the pump at high speeds can create low-pressure zones that lead to cavitation.

2. **Insufficient NPSH:** If the NPSH available is lower than the NPSH required, cavitation can occur.

3. **Clogged or Restricted Suction Lines:** Blockages or restrictions in the suction lines can create cavitation in the pump.

4. **Incorrect Pump Installation:** Improper installation of the pump, such as incorrect piping or valve settings, can lead to cavitation.

How to Solve Pump Cavitation

To solve pump cavitation in centrifugal pumps, the following steps can be taken:

1. **Increase NPSH:** Increasing the NPSH available by adjusting the pump elevation or using a booster pump can help prevent cavitation.

2. **Reduce Pump Speed:** Lowering the pump speed or installing a VFD can help reduce the risk of cavitation.

3. **Check for Blockages:** Inspecting the suction lines for any blockages or restrictions and clearing them can help prevent cavitation.

Cavitation in a centrifugal pump occurs when the pressure of the liquid drops below its vapor pressure, leading to the formation of vapor bubbles. As these bubbles collapse …

Figure 2: Schematic of in-line vacuum degasser: (a) Flow path; (b) expanded section to illustrate gas passing through semipermeable membrane. See text for discussion. In-line degassers are quite reliable, and will operate for months or years with little or no maintenance. It is a good practice to avoid storage of the degasser with buffer or .

define cavitation in centrifugal pump|pump impeller cavitation damage pictures