centrifugal pump solved examples|centrifugal pumps handbook pdf : bulk The document contains 5 solved problems related to centrifugal pumps. The problems cover topics like calculating head, power required, efficiency, … The water based drilling fluid system should be fully saturated before penetrating the salt formation, in order to avoid large washouts at the top of the salt. Saturation is achieved by adding salt (Sodium Chloride) to the mud system until the saturation point is reached around 315,000 mg/l, with chloride content around 190,000 mg/l.
{plog:ftitle_list}
An MPD system is deployed on Brasdril’s Ocean Valor semi for Petrobras’ first managed pressure drilling/mud cap drilling operation from a dynamically positioned rig. The operation .
Centrifugal pumps are widely used in various industries for fluid transportation and are known for their efficiency and reliability. In this article, we will explore a centrifugal pump example to understand how these pumps work and how to calculate important parameters.
The document contains 5 solved problems related to centrifugal pumps. The problems cover topics like calculating head, power required, efficiency,
Example:
A centrifugal pump has an outlet diameter equal to two times the inner diameter and is running at 1200 rpm. The pump works against a total head of 75 m. We need to calculate the velocity of flow through the impeller.
Solution:
To calculate the velocity of flow through the impeller, we can use the formula:
\[ V = \frac{Q}{A} \]
Where:
- \( V \) = Velocity of flow (m/s)
- \( Q \) = Flow rate (m\(^3\)/s)
- \( A \) = Area of the impeller (m\(^2\))
First, we need to calculate the flow rate using the formula:
\[ Q = \frac{\pi \times D^2 \times N}{4 \times 60} \]
Where:
- \( D \) = Diameter of the impeller (m)
- \( N \) = Pump speed (rpm)
Given that the outlet diameter is two times the inner diameter, we can calculate the diameter of the impeller:
Inner diameter, \( D_i = D \)
Outlet diameter, \( D_o = 2D \)
Area of the impeller, \( A = \frac{\pi}{4} \times (D_o^2 - D_i^2) \)
Substitute the values and calculate the flow rate:
\[ Q = \frac{\pi \times (2D)^2 \times 1200}{4 \times 60} \]
Next, we calculate the area of the impeller:
\[ A = \frac{\pi}{4} \times ((2D)^2 - D^2) \]
Now, we can calculate the velocity of flow using the formula mentioned earlier.
Dimensionless performance curves for a typical centrifugal pump from data given in Fig. 14.9 Fig. (14.10)
Horizontal Directional Drilling Done Right: Most extensive product & part list. We are the contractor's choice when you need the right too & need it now.
centrifugal pump solved examples|centrifugal pumps handbook pdf