centrifugal pump suction cavitation|causes of pump cavitation centrifugal

The BRANDT™ Transfer System (BTS) by WellSite Services’ Brandt Services group transfers slurries of drilled solids, wastes, and sludge from one point to another or to an off-site location. Specifically, the BTS is used to pump drilled material from closed-loop systems, reserve pits, barges, oil storage tanks, and bulk haulage vessels.

Centrifugal pumps are widely used in various industries for transferring fluids from one place to another. However, one common issue that can affect the performance and longevity of centrifugal pumps is suction cavitation. In this article, we will delve into what suction cavitation is, its impacts on pump performance, the reasons for cavitation, and how to avoid it.

Cavitation occurs in centrifugal pumps when there is insufficient pressure at the pump’s suction end. Bubbles accumulate around the impeller eye and eventually implode, causing intense shockwaves to damage the impeller or pump housing.

What is Cavitation in a Centrifugal Pump?

Cavitation in a centrifugal pump occurs when the pressure of the liquid drops below its vapor pressure, leading to the formation of vapor bubbles in the pump. These vapor bubbles collapse or implode when they enter a higher pressure region, causing damage to the pump components. Suction cavitation specifically refers to the formation of vapor bubbles at the pump's inlet due to low pressure conditions.

Impacts of Cavitation on Pump Performance

Cavitation can have several negative impacts on the performance of a centrifugal pump, including:

1. **Reduced Pump Efficiency:** The presence of vapor bubbles in the pump reduces the effective flow rate, leading to decreased pump efficiency.

2. **Increased Noise Levels:** Cavitation can produce loud noise levels, which can be disruptive in industrial settings.

3. **Damage to Pump Components:** The implosion of vapor bubbles can cause erosion and pitting on the pump impeller and other components, reducing their lifespan.

Reasons for Cavitation & How to Avoid It

# Centrifugal Pump Cavitation Problems

There are several reasons why cavitation may occur in a centrifugal pump:

1. **Low Inlet Pressure:** If the pump is operating at a pressure lower than the vapor pressure of the liquid being pumped, cavitation can occur.

2. **High Pump Speed:** Excessive pump speed can create low-pressure zones within the pump, leading to cavitation.

3. **Clogged Inlet Strainer:** A clogged inlet strainer can restrict the flow of liquid into the pump, causing cavitation.

# How to Prevent Centrifugal Pump Cavitation

To prevent cavitation in centrifugal pumps, the following measures can be taken:

1. **Maintain Proper Inlet Pressure:** Ensure that the pump is operating at a pressure higher than the vapor pressure of the liquid.

2. **Optimize Pump Speed:** Adjust the pump speed to a level that minimizes the formation of low-pressure zones.

3. **Regular Maintenance:** Clean and inspect the inlet strainer regularly to prevent clogging.

# Why is Cavitation Bad?

Cavitation is detrimental to centrifugal pumps for several reasons:

1. **Reduced Pump Efficiency:** Cavitation reduces the pump's ability to deliver the desired flow rate, impacting overall system performance.

2. **Increased Maintenance Costs:** The erosion and damage caused by cavitation necessitate frequent repairs and component replacements, increasing maintenance costs.

# Pump Impeller Cavitation Damage Pictures

[Insert images of pump impeller cavitation damage here]

# Centrifugal Pump Problems

Apart from cavitation, centrifugal pumps may also encounter other issues such as:

1. **Overheating:** Excessive friction or inadequate cooling can lead to pump overheating.

2. **Seal Leakage:** Improper sealing can result in fluid leakage from the pump.

# Why Does a Pump Need Cavitation?

While cavitation is harmful to centrifugal pumps, a certain level of cavitation is necessary for the pump to operate efficiently. Properly managed cavitation can help improve pump performance by reducing energy consumption and increasing flow rates.

# Causes of Pump Cavitation Centrifugal

The primary causes of pump cavitation in centrifugal pumps include:

1. **Low NPSH (Net Positive Suction Head):** Inadequate NPSH can lead to cavitation due to low inlet pressure.

2. **High Pump Speed:** Excessive pump speed can create low-pressure zones, promoting cavitation.

# How to Solve Pump Cavitation

To address pump cavitation issues in centrifugal pumps, the following steps can be taken:

1. **Increase NPSH:** Ensure that the pump has sufficient NPSH to prevent cavitation.

If left untreated, pump cavitation can cause: Failure of pump housing; Destruction of impeller; Excessive vibration - leading to premature seal and bearing failure; …

Cuttings Blower unit Onsite Treatment Technologies AS Skvadronvegen 22, 4050 Sola Norway Office +47 51 70 97 40 Onsite Treatment Technologies Inc. 801 Seaco Ave. Deer Park TX 77536 USA Phone +1 (985) 664-7057 [email protected] www.ott-as.no Dimensions: CertifiCation: Lenght 1800 mm Ex zone 1 Width 1200 mm ATEX Hight 1815 mm Z015 DNV 2.7-1

centrifugal pump suction cavitation|causes of pump cavitation centrifugal