characteristics of centrifugal pump|pump discharge chart

Manufacturer of Screw Pump, Industrial Pumps & Vacuum Pump offered by S.R.Pumps India from Kanpur, Uttar Pradesh, India

Vertical centrifugal pumps, also known as cantilever pumps, are a type of pump that offers unique characteristics and features compared to other pump designs. These pumps are widely used in various industries due to their efficiency, reliability, and ease of maintenance. In this article, we will explore the characteristics of centrifugal pumps in detail, including their design, operating principles, and different types.

Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. They are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. The fluid enters

Design and Construction

Vertical centrifugal pumps have a distinctive design that sets them apart from other types of pumps. One key feature of these pumps is their shaft and bearing support configuration, which allows the volute to hang in the sump while the bearings are located outside the sump. This design eliminates the need for a stuffing box, making maintenance and operation easier.

The pump impeller is a crucial component of a centrifugal pump. It is responsible for converting the mechanical energy from the motor into kinetic energy, which is then used to move the fluid through the pump. The impeller is typically made of materials such as stainless steel, cast iron, or bronze, depending on the application and fluid being pumped.

Operating Principles

Centrifugal pumps work on the principle of centrifugal force, which is the outward force experienced by an object moving in a circular path. When the pump is in operation, the impeller rotates at high speeds, creating a centrifugal force that pushes the fluid towards the outer edges of the impeller. This action increases the fluid's velocity and pressure, allowing it to be discharged through the pump's outlet.

The flow rate of a centrifugal pump is determined by the impeller size, speed of rotation, and the design of the pump casing. Higher impeller speeds and larger impeller sizes typically result in higher flow rates. Centrifugal pumps are known for their ability to handle large flow rates, making them suitable for applications that require moving large volumes of fluid.

Types of Centrifugal Pumps

There are several different types of centrifugal pumps, each designed for specific applications and operating conditions. Some common types of centrifugal pumps include:

1. **Single Stage Centrifugal Pump**: This type of pump has only one impeller and is used for applications that require low to moderate pressure and flow rates.

2. **Multi-Stage Centrifugal Pump**: These pumps have multiple impellers stacked in series to achieve higher pressure levels. They are commonly used in high-pressure applications such as boiler feed systems and water treatment plants.

3. **Vertical Turbine Pump**: A type of centrifugal pump where the motor is located above the ground and the pump impellers are submerged in the fluid. These pumps are ideal for deep well applications.

According to Reti, the first machine that could be characterized as a centrifugal pump was a mud lifting machine which appeared as early as 1475 in a treatise by the Italian

While turning, the two screws are forming closed chambers that are moving in an axial direction. This movement creates a vacuum at inlet side and a pressure at the outlet. Due to this double chamber technic there is an almost pulsation free working with high and low viscosity products. . Due to the design, the twin screw pump can deliver a .

characteristics of centrifugal pump|pump discharge chart